On this page
Yes, many parking lots can host a robotaxi charging site, but not every lot fits. The first purpose-built robotaxi depot in Nashville is 80,000 square feet and opened in October 2026. Its operator says smaller satellite charging and cleaning sites will follow across the city. Those satellite sites are where ordinary property owners come in.
What opened in Nashville
On October 2, 2026, Flexdrive, Lyft's fleet management unit, cut the ribbon on an 80,000-square-foot depot in Nashville. It services Waymo robotaxis. Waymo vehicles were set to arrive on October 12, according to Lyft's announcement.
The numbers tell owners what a hub looks like:
- 80,000 square feet, in a former post office building near the airport.
- Dozens of fast chargers.
- Maintenance bays for high-voltage repairs, plus secure parts storage.
- Three shifts, around the clock.
- More than 70 new full-time jobs this year.
WSMV reported that the site is designed to handle hundreds of cars a day. Each car drives itself to the depot at least once daily. Crews inspect, clean and charge it on the same visit.
Why a hub is not enough
One depot cannot serve a whole metro area well. Every trip back to the hub is a trip with no rider and no fare.
Lyft has said it will add satellite charging and cleaning sites around Nashville as the fleet grows. The goal is faster turnaround and shorter rider wait times, as Sherwood News reported. WSMV reported that Waymo also plans more charging sites around the city.
That creates a two-tier model:
- The hub. Heavy repairs, parts, staff and the largest bank of chargers.
- Satellites. Smaller lots spread through the service area for quick charging, cleaning and staging.
A satellite does not need maintenance bays. It needs power, space, access control and a short drive to where riders are.
What makes a lot a good satellite site
Fleet operators look at a short list. Owners can check most of it before the first call.
Location inside the service area. Robotaxis run inside a mapped zone. A lot outside that zone has little value to the fleet. Nashville's operator picked its hub site partly because it sits near the airport, where Waymo has been testing.
Power at the property line. Fast chargers draw heavy loads. The U.S. Department of Energy tells site hosts to engage the utility early. The utility can check available capacity, required upgrades and rate effects.
Distance to the transformer. DOE lists proximity to incoming electricity, trenching and metering upgrades as key site factors. Long trench runs add cost fast.
Space to move. Driverless cars need clear, simple circulation. Tight turns, dead ends and mixed public traffic slow them down.
Security. Vehicles may sit unattended. Lighting, fencing, gates and cameras matter more than on a typical retail lot.
Connectivity. Networked chargers need wired, wireless or cellular data, per DOE guidance.
What the charging hardware costs
Owners should know the cost range before they negotiate who pays.
DOE's Alternative Fuels Data Center cites a national lab report on DC fast charging:
- Equipment: $38,000 to $90,000 per connector. Higher power costs more.
- Installation: $20,000 to $60,000 per connector. It depends on charger power and how many chargers share the site.
DOE notes that installation labor is the largest expense. Per-charger cost drops a lot on larger installs. That favors a site that can hold a full bank of chargers over one that can hold two.
These figures cover hardware and install. They do not cover utility service upgrades, paving, lighting or fencing. Get those quoted separately.
Deal structures to compare
There is no single standard lease for robotaxi sites yet. Owners usually weigh three options:
- Ground lease. The fleet operator leases the land and builds the site. The owner collects rent and takes the least risk.
- Owner-built, operator-leased. The owner funds the paving, power and chargers. The operator signs a longer lease at higher rent. The owner carries construction risk.
- Shared or managed site. Part of the lot stays in public parking. A zone is fenced for fleet use. A parking manager runs both sides.
Key terms to settle in writing:
- Who owns the chargers at lease end.
- Who pays for utility upgrades and demand charges.
- Hours of access and noise limits for 24-hour operations.
- Insurance and liability for unattended vehicles.
- Removal and restoration duties if the operator leaves.
Ask about the federal 30C credit too. DOE says it covers up to 30% of purchase and install cost, depending on eligible location. Check current eligibility rules with a tax advisor before you count on it.
Zoning and permits come first
Many codes do not name robotaxi depots. A city may treat a satellite as a parking lot, a vehicle service use or a fleet yard. Each label carries different rules. We covered this in Robotaxi Depot Zoning: What Cities Now Require of Owners.
Charger work also needs electrical permits, inspections and a licensed contractor. DOE recommends EVITP-certified electricians. Plan the permit timeline before you sign a lease with a start date.
How to decide on charger type
Satellites can use manual plug-in chargers, robotic connectors or wireless pads. Each choice changes layout, cost and staffing. Fleets with no drivers want the car to charge with as little human help as possible. Nashville crews report that charging there is largely automated. Read our breakdown in Robotaxi Depot Charging: Wireless, Robotic or Manual?.
Questions to ask before you sign
Fleet operators move fast once they pick a city. Have these answers ready before the first meeting:
- How many vehicles will use the site each day, and at what hours?
- How many chargers, at what power, and who chooses the hardware?
- Will staff work on site, or will the site run unattended?
- Will cleaning happen on site? That needs water, drains and trash service.
- How long is the lease, and what are the renewal and exit terms?
- What happens to the site if the fleet leaves the market?
Clear answers protect the property's value either way.
How Wins Parking handles this work
Wins Parking is family-owned and has worked in the Vail Valley since 2016. We serve owners across the country with design, build and manage teams.
For robotaxi and fleet sites, we:
- Assess the lot. Service-area fit, power, circulation, security and zoning.
- Design the site. Charger layout, stall geometry for driverless cars, lighting, drainage and snow storage.
- Build it. Wins Design & Build handles paving, striping, drainage and electrical coordination for EV charging.
- Manage it. Access control, LPR cameras, permits and enforcement through our parking management services.
See our autonomous vehicle parking work and our case studies.
Next step
Want to know if your lot could host a robotaxi satellite site? Call (970) 279-1744 or start at https://winsparking.com/contact.
Frequently asked questions
What is a robotaxi satellite charging site?
It is a smaller lot inside a robotaxi service area where driverless cars stop to charge, get cleaned and wait for trips. It supports a larger hub depot that handles heavy repairs and parts.
Does a satellite site need maintenance bays?
Usually not. Hubs like the Nashville depot handle high-voltage repairs and parts storage. A satellite mainly needs power, chargers, clear circulation, security and data connectivity.
Who pays for the chargers at a robotaxi site?
It depends on the deal. In a ground lease the fleet operator usually builds and pays. In an owner-built deal the owner funds the work and charges higher rent. Put charger ownership at lease end in writing.
Can my lot still serve public parking if it hosts fleet charging?
Often yes. A shared site fences off a fleet zone and keeps the rest open to the public, with one parking manager running both sides.
How long does it take to get a site ready?
Timing depends on zoning review, utility upgrade schedules and electrical permits. Ask the utility and the city for their timelines before you agree to a lease start date.